7/16 - 14 HIGH SPEED STEEL NUT TAP
High Speed Steel Nut Tap - usually characterized by longer thread length, longer chamfer, and longer shank than regular hand taps. For machine use....
1/4 - 20 HIGH SPEED STEEL NUT TAP
High Speed Steel Nut Tap - usually characterized by longer thread length, longer chamfer, and longer shank than regular hand taps. For machine use....
5/16 - 18 HIGH SPEED STEEL NUT TAP
High Speed Steel Nut Tap - usually characterized by longer thread length, longer chamfer, and longer shank than regular hand taps. For machine use....
5/16 - 24 HIGH SPEED STEEL NUT TAP
High Speed Steel Nut Tap - usually characterized by longer thread length, longer chamfer, and longer shank than regular hand taps. For machine use....
3/8 - 16 HIGH SPEED STEEL NUT TAP
High Speed Steel Nut Tap - usually characterized by longer thread length, longer chamfer, and longer shank than regular hand taps. For machine use....
1/2 - 13 HIGH SPEED STEEL NUT TAP
High Speed Steel Nut Tap - usually characterized by longer thread length, longer chamfer, and longer shank than regular hand taps. For machine use....
1/4 - 28 HIGH SPEED STEEL NUT TAP
High Speed Steel Nut Tap - usually characterized by longer thread length, longer chamfer, and longer shank than regular hand taps. For machine use....
#1 - 72 High Speed Steel Plug Tap
High Speed Steel. Ground Thread . Plug taps are the most popular hand tap, with a lead in between Taper Taps and Bottoming Taps. Can be used in a machine as well as by hand( but it does not drive the chips ahead like a Spiral Point Tap)....
#2 - 56 High Speed Steel Plug Tap
High Speed Steel. Ground Thread . Plug taps are the most popular hand tap, with a lead in between Taper Taps and Bottoming Taps. Can be used in a machine as well as by hand( but it does not drive the chips ahead like a Spiral Point Tap)....
#8 - 36 High Speed Steel Plug Tap
High Speed Steel. Ground Thread . Plug taps are the most popular hand tap, with a lead in between Taper Taps and Bottoming Taps. Can be used in a machine as well as by hand( but it does not drive the chips ahead like a Spiral Point Tap)....